Production Testing Equipment Rentals
We provide customized production testing equipment, made to order and ready for deployment whenever and wherever it is needed.
High Stage and Low Stage Separators
Our separators meet or exceed environmental industry standards while providing better operator safety, cleaning protocols, efficiency, and gas/fluid metering.
We have the capability to build and modify equipment faster than any other Canadian manufacturer. Through the use of our carefully selected and top-of-the-line instruments, advanced communication hardware, custom-built software, and in-house managed system, we can adapt quickly to your requirements and develop solutions that exceed your needs.
Our installation of high and low fluid shutdowns eliminates the environmental risk of spills and the potential of overpressurizing fluid-carrying secondary vessels. Our gas and fluid metering systems are among the most advanced on the market, and all vessels have dual ABB/SCADA compatible digital meters, with Barton chart records for backup on the gas side. The fluid side uses sur-flow totalizers. combined with either D4 actuated fluid valves or full-port 3” V-ball valves in concert with Fisher L2 Controllers.
Auxiliary Production Testing Equipment
Our auxiliary equipment gets the same care, maintenance, and thoughtful design as the main site machinery – because we believe that all parts of an efficient production testing system contribute to the whole.
We have the capability to build and modify equipment faster than any other Canadian manufacturer. Through the use of our carefully selected and top-of-the-line instruments, advanced communication hardware, custom-built software, and in-house managed system, we can adapt quickly to your requirements and develop solutions that exceed your needs.
We offer custom equipment builds and configuration packages for various applications, such as pipelines, facility builds, switchovers, and daisy chain de-foaming to improve operational efficiencies for H2S projects. Our analyzers make H2S natural gas processing economical and efficient by eliminating the need to send samples back to the lab and wait for results. They produce highly accurate compositional analysis with gas chromatography and the potential to reduce operational costs via live, accurate data.
Our flare stack rental fleet includes both mobile and free-standing options. All flare stacks come standard with integral flame arrestors, auto ignition and knockout pots, and all auxiliary lines are full port to provide several functional tie-in points for more than one flowback package.
Our innovative line cooler vessel utilizes a series of bundles to cool hot effluent between the flow source and surface.
MAWP 635 psi (205°C – 400°F)
- 2″ 4-stage sectional coil system
- Inline chock setup
- 3″ fluid bath circulation (inflow and outflow)
- Skid Mounted
Our vaporizers are flame arrested, with a digital onboard burner management system ensuring zero risk of an explosion. These units can be filled with water or glycol and are typically used to vaporize propane.
At TARA, you can count on uninterrupted flowback with our internal sparging process, which translates to an increase in production time and the elimination of sand transferred to the pipeline. Ultimately, this leads to reduced third-party trucking and washed parts costs, as well as significantly reduced downtime. Every TARA vessel has sparge coils, and crew members are trained to operate the pump.
Our high-volume fluid pump skids are capable of pumping at 500 L/min at 1800 psi, and our pumps can also be utilized on other applications, such as fluid transfers, injections, and circulation.
Bridge manifolds change the way we interface our flowback equipment with Multi-Well Pads, enabling a seamless flow from any well to any vessel within each group. Extra adjustable chokes allow for better well regulation, flowing together more efficiently to one separator, as well as adding another downward pressure stage that reduces erosion on equipment.
Each bridge allows each well to flow to a clean-up separator, then to a group separator, before being pulled out to a single well-test separator – all without shutting down operations and causing downtime.
Our dual-stage manifolds are mounted on full containment skids, and have 3” double drops with two adjustable chokes and two positive chokes.
We have all sized of pipe between 1” to 6”, and we can manufacture skids customized to your needs.
4 Inch & 3 Inch Production Line Skid
3 Inch Production Line Skids
- 3” Fig 206 production line (1,200’)
- 3” Swings (Qty-36)
- 3” Flow tee w/t/w
- 3” Flow tee w/t/t
- Skid Mounted with Tool Crib
3 Inch psi, Flow Line Skids
- 3” XXH 4130
- 162’ Flowline
- (Qty-12) 3” Cushioned swings
- (Qty-1) BX 154 x 3”
- Fig 1502 wing changeover
- Skid Mounted with Tool Crib
Our line heaters are available in 5,000 and 10,000 psi configurations, and they offer an indirect heating solution for subzero flowback conditions: the flow passes through a series of bundles that sit within a water or glycol bath.
5,000 psi 3” Cushioned Heater
- Pass upstream 3” 5,000 psi
- 8 Pass downstream 3” 5,000 psi
- MBTU with full burner management system
- Low level shutdown
- External LEL detection shutdown
- Fully insulated fluid bath
- Skid Mounted
5,000 psi 2” Heater
- Pass downstream 2” 5,000 psi
- Adjustable choke and flanged gut spool
- 2” 1 MBTU
- Fully insulated fluid bath
- Skid mounted
To manage the large amounts of sand found in today’s new completion flowbacks, we have invested in high-volume fluid pump skids to sparge our vessels and remove sand without interrupting flow operations. This reduces costs, downtime, and washed parts within the vessels. The only additional equipment needed is one 400 BBL tank beside the pump skid.
Our sparge pumps have a 20,000 psi pressure rating with a maximum flow rate of 500 L/min. As an added benefit, these pumps can be utilized for other applications on location as well such as fluid transfers, injection, and circulation.
All of our double barrel debris catchers are built with a containment skid underneath them, ensuring zero spills when checking debris screens. They are available in 2” or 3”, rated up to 10,000 psi, with 5- and 9-valve versions available. The dual-stage manifolds have two adjustable chokes and two positive chokes for better control.
TARA ESDs come in a range of PSI options, acting as an emergency safeguard to remotely stop flowback in the event of a release downstream of the flow source.
We offer valves rated at 2,000, 5,000, 10,000, and 15,000 psi, ensuring you get the right size for your needs in the field.
Our innovative line cooler vessel utilizes a series of bundles to cool hot effluent between the flow source and surface.
MAWP 635 psi (205°C – 400°F)
- 2″ 4-stage sectional coil system
- Inline chock setup
- 3″ fluid bath circulation (inflow and outflow)
- Skid Mounted
REDEFINING STANDARDS
Redefining Our Production Testing Industry Standards
TARA has invested extensively to implement and improve on environmental and safety industry standards. While following certain mandates of current industry environmental concerns, we have added features such as digital metering, process spec shutdowns, and patent-pending internal separator designs inclusive of mist extracting weir plates and diffusers to decrease greenhouse emissions.
To address operator safety, we have also installed visual alarm systems to the exterior of operator cabins to eliminate confined space entry. These alarms alert all personnel if Hydrogen Sulphide or Low Explosion Levels are inadvertently present. Your team’s safety is always a priority with TARA-built production testing equipment.
